Application

Fume/Smoke extraction,Dental equipment,Laser machine,
Sterilization equipment,Dehumidifiers Etc.

Technical Data

Model	NXK60-1200-FZ03
Rated Voltage (VAC)	220
Rated Frequency (Hz)	50/60
Max.Input Power (W)	500±5%	800±5%	1200±5%
Max. Current (A)	3.5	5.7	8.1
Max. Airflow(m3/min)	2.4±5%	3.0±5%	3.3±5%
Max.Static Pressure (kPa)	18±5%	26±5%	31±5%
Max. speed (rpm/min)	20600±5%	25500±5%	28500±5%
Insulation Class	F
Protection Class	IP 00
Working Mode	Continuous
Min Start-Up Voltage(V)	180
Speef control Mode	0～10V DC
Working Environment	Temperature -10～50℃
	Humidity 15～85%RH No Condensation
Stock Environment	Temperature -20～70℃
	Humidity 15～85%RH No Condensation

Dimensions/Wiring diagram

product-1915-1109

product-1953-991

Factory Show

Tangential By Pass BLDC Blower for Fume Extraction System

Tangential By Pass BLDC Blower is usually the first choice for fume extraction system. In today's society, the demand for environmental protection is getting higher and higher. Fume extractor is widely needed in industrial manufacturing industry in order to create a good working environment. And the blower is the core component of the extractor.

Compared with the traditional brushed blower, Tangential by pass bldc blower is operated by driver board, and the life is much longer. It no need to changed carbon brush, if so, the maintenance cost is much lower. Especially the performance is more efficient, the maximum pressure can be reach to 31kPa and airflow is up to almost 200m3/h at only 1200W.

So why settle for anything less when you can have the best? Invest in a Tangential By Pass BLDC Blower for your laser machine today and experience the difference in performance and efficiency.